M-12

Single-phase induction watt-hour meter, M12 line, 1 element (2 or 3 wires) line-load, 120 V, 240 V or 480 V; 50 Hz or 60 Hz, cyclometric type register with primary reading, magnetic repulsion bearing, accuracy class 2.

Among the M12 meter main characteristics we may mention:

» potencial circuit low consumption;
» high level of record accuracy;
» registers with self-lubricating plastic gearing, which strongly reduces friction;
» long useful life thanks to its system of magnetic repulsion bearings;
» terminal block and base making up a single body;
» lightness and compactness;
» meter cover in polycarbonate, resistant to mechanical shocks;
» easy maintenance;
» all metallic parts submitted to a special chemical treatment;
» potential and current elements forming a single magnetic circuit;
» calibration devices of easy access;
» all plastic components resistant to UV rays.

D-58 Meter

Polyphase induction Watt-hour meter, D-58 model, 2 stators (3 wires) or 3 stators (4 wires) line-load, 60 V, 120 V, 360 V or 480 V, 50 Hz or 60 Hz, cyclometric type register, primary or secondary reading, magnetic repulsion bearings, class 2 accuracy.
D-58 polyphase Watt-hour meter, with magnetic repulsion bearings is offered in 2 basic models:

» D-58I : meter with 400% overload;
» D-58J : meter with 800% overload.

DR-58 Meter
Reactive energy meter designed on the lines of the D-58 Watt-hour meter.

Saga 2000 - Electronic Meter of Energy

The family Saga 2000 is composed by electronic meters of electric power, developed by

Landis+Gyr for application in conventional tariffs and binominal, showing in the display besides

the consumption and demand, other important greatness for evaluation of the electric system,

as tension, current and factor potency.

Saga 2000 - Electronic Meter of Energy

The family Saga 2000 is composed by electronic meters of electric power, developed by

Landis+Gyr for application in conventional tariffs and binominal, showing in the display besides

the consumption and demand, other important greatness for evaluation of the electric system,

as tension, current and factor potency.

Saga 4500 – Portable Electronic Meter of Energy

The Saga 4500 Ampflex is an analyzer and electronic register of electric systems similar to the

Saga 4000, however totally appropriate to the use in distribution nets uncovered (weather

proof), because it uses sensor of flexible current without any metallic part, with the installation

easiness in circuits with more than a cable for phase.

SMART CAP 200 - CONTROLLING OF FACTOR OF POWER LOW TENSION

Economy against the account of energy; Lesser panels, (plate economy and space); Increase of the life of the capacitors; Protection of the contatoras and capacitors; Bigger precision; Monitorial tension; Great easiness to program, among others.

Technical features

» Controlling automatic of bank of capacitors
» Connection delta & she stars
» Number of drive : of 6 or 12 exits of type relays of I contact dry & passage for zero
» Manner of Operation : manual or automatic
» 1 element of measurement of current & 1 of tension
» Measures tension , current , power active , apparent & reactivated frequency, factor of power Thd of tension
» Precision 2% Entrance of tension of feed : 85 the 265Vca ( feed CC under she consults )
» Entrance of tension of measurement : 50 the 500Vca
» Entrance of current : 0,05 the Aca
» Sensoriamento of the FP : 0,7i the frequency: 50 or 60Hz; Time of Retard about to opening & closure from the drive
» Alarm 1 exit with capacity about to 10VA, 250Vca; Comsumption <10VA
» Capacity of drive of each stage : 105VA
» Tension of I work maximum of the drive: 220Vca + 10%

SMART CAP 485 - CONTROLLING OF FACTOR OF POWER LOW TENSION

SMART CAP 485 is a destined equipment to control the banks of capacitors automatically. It controls the factor of power in single-phase or three-phase electric installations, through the automatic commutation of capacitors. It underneath eliminates or it diminishes fines and losses power factor.

Total programmable through its keyboard of membrane or it saw net. Its liquid crystal display (LCD) makes possible to visualize the largenesses of tension, chain, factor of power, active power, apparent power, reactive power, frequency and THD of tension. Equipped with serial communication channel RS485, allowing to be on to an equipment net with protocol of communication MODBUS-RTU. Its methodology of measurement determines the real factor of power of the monitored electric net, being the same method used for the concessionaires of electric energy.

Technical features

» Controlling automatic of bank of capacitors
» Controlling of factor of power monophase (1 element of measurement ) or trifásico (2 or 3 elements of measurement )
» Connection delta or she stars
» Number of periods of training (drive): of 6 or 12 exits of the been type solid and ticket for zero
» Manner of Operation : automatic or manual
» Measures tension , current , power apparent , reactivated , active , power reactivated requires frequency, factor of power THD & harmonic odd but also 11° order about to tension , the grade point average trifásica from the greatnesses of tension , current
» Entrance of tension of feed : 90 the 270Vca ( about to feed DC consult )
» Entrance of tension from measurement : 50 the 500Vca, high impedância
» Entrance of current : 0,05 the 5A, from one side to the other TC in
» Above from the values nominal it is possible the sensoriamento via the I use of transformers of current TC’s ) or transformers of potential TP’s )
» Sensoriamento of FP : 0,5i the 0,8c
» Time of retard programmable about to opening & closure from the acionamentos.
» Frequency electric of feed & measurement : 45 the 65Hz
» Alarm 1 exit with capacity about to 105VA, 250V
» Comsumption 10VA
» Capacity of acionamento of each stage : 105VA, 250V
» Door serial RS485
» Velocidade of Communication programmable em 9600, 19200 & bits per second
» Ceremonious of communication serial Modbus RTU

POWER CAP 485 COMMAND AUTOMATIC ABOUT TO SEATS OF CAPACITORS ON THE AVERAGE TENSION

POWER CAP 485 is an automatic controller of banks of capacitors, destined the correction of the line of distribution made for the concessionaires of electric energy. Being the control made for time, tension, chain or factor of power, whose band of adjustment can be increased by period in the time (time/tension, current time/). Total programmable through its keyboard of membrane or it saw net. Its liquid crystal display (LCD) makes possible to visualize the largenesses of tension, chain, factor of power, active power, apparent power, reactive power, frequency, THD and uneven harmonicas of tension until 11° order. Equipped with serial communication channel RS485, allowing to be on to an equipment net with protocol of Modbus-RTU communication. It possesss control for three periods of training (three banks of capacitors ON+OFF). It possesss internal clock to supply the advantage to work in real time.

Technical features

» Controlling automatic of bank of capacitors of average tension
» Controlling of factor of power monophase (1 element of measurement ) that permits the screening & monitoramento from a net electric trifásica equilibrada
» Number of stage acionamentos ): 3 of type relays of I contact dry
» Manner of Operation : automatic or manual
» Precision 0,5% about to tension & current
» feed 90 the 270Vca ( about to feed DC consult )
» Measurement direta of tension : 50 the 500Vca, high impedância
» Measurement direta of current : 0,05 the 5A, from one side to the other TC in
» Above from the values nominal it is possible the sensoriamento via the I use of transformers of current TC’s ) or transformers of potential TP’s )
» Sensoriamento of FP : 0,5i the 0,8c.
» Time of retard programmable about to opening & closure from the seats of capacitors
» Blockade from modification of the adjustment em days scheduled from week
» Freqüência electric of feed & measurement : 45 the 65Hz
» Alarm 1 exit NANF +) with capacity about to 5 The , 250V
» comsumption 10VA
» Three stage acionamentos ON & OFF with capacity about to 16 The , 250V
» Door serial RS485
» Velocidade of Communication programmable em 9600, 19200 & bits per second
» Ceremonious of communication serial Modbus RTU
» Availability alarm about to prevent the acionamento of the bank of capacitor after overtake the maximum number of swaps

SMART CONTROL D - CONTROLLING OF ACTIVE DEMAND

The SMART CONTROL D prevents that the customer pays fine for the ultraticket of the maximum demand of contracted electric energy. The Smart Control D was projected to be used in the management and control of the consumption of electric energy. Acting individually in up to 7 different loads. Equipment with high precision and speed of answers. The SMART CONTROL D was developed to work directly on with any electronic measurer of tarifação installed for the concessionaires, with standard ABNT. Through the information received from the measurer, the SMART CONTROL D calculates the projected demand in the end of the period of tarifação monitored for the concessionaire. In case that the projected data indicate a ultraticket of the contracted value consequentemente and the possibility of application of fines, it it will go to act in the control exits disconnect loads necessary to keep the demand under control. All the programming of the equipment easily is made way keyboard and incorporated display to the proper eliminated equipment the complex necessity of softwares and dedicated computers for execution of this task

Technical features

» 7 exits of drive 250VCA/CC, 1A (exit 7 can optionally be used as alarm)
» Operating temperature: 0 55°C
» Tension of feeding: 90 260VCA
» Electric frequency of feeding with: 45 the 70 Hz
» Consumption 10VA
» al communication door RS485, MAC protocol MODBUS RTU
» Serial communication door for exit of user with protocol NBR 14522